City of Windsor Ontario

PROBLEM: Installation of rail tracks alongside this roadway caused the road to slope the wrong way.

SOLUTION: MG-KRETE was used to level the entire concrete road from 3 inches thick at one side to ¼ inch thick at the other.


Tim Hortons, Hamilton, Ontario

PROBLEM: Oil, salt and moisture were causing spalling of the concrete drive-through pad.

SOLUTION: MG-KRETE was overlayed to restore the driveway without the need for any concrete removal.

Buffalo Bills Stadium, Buffalo, New York

PROBLEM: Aisleways from the concessions to seating were worn, spalled and experiencing cracking.

SOLUTION: MG-KRETE was used to patch spalling, repair cracks, and even out trip hazards.

 

Gravenhurst Ski Resort, Gravenhurst, Ontario

PROBLEM: Ice and salt combined with heavy foot traffic was causing surface deterioration of the concrete steps and walkways.

SOLUTION: MG-KRETE overlay restored the surface and provides long-term protection against salt and ice with a very durable, abrasion resistant surface.

 


Lasco Steel, Whitby, Ontario

PROBLEM: The heavily abusive environment in this steel plant was causing concrete failure in their flooring.

SOLUTION: MG-KRETE was applied to restore the floor and provide a heavy duty flooring able to withstand the industrially abusive environment. The contractor finished the job in one third of the time he had allotted using conventional floor repair.

 


Powell Barrier, Richmond Hill, Ontario

PROBLEM: Physical abuse as well as environmental contaminants were damaging these highway dividers.

SOLUTION: MG-KRETE repairs are strong, durable and easy to apply.

1.2.3.4.5

The "perfect patch" for concrete repair and overlay. MG-KRETE lasts much longer and withstands wear and heavy traffic better than traditional cement-based patch materials. It tenaciously bonds to the concrete, without shrinkage, creating a surface that is more impervious to moisture, salt, gas and oils. It requires less long-term maintenance. MG-Krete sets within one hour, even at sub-zero temperatures, helping to dramatically cut production downtime. more...

Densifies, hardens and seals concrete permanently from within, becoming an integral part of the matrix, not just a surface coating. Untreated concrete is porous and susceptible to intrusion by salts, gases and oil. Treatment with D-TECH provides a permanent solution with unparalleled resistance to contamination and abrasion, never wearing off. more...

Meets the most demanding needs for extreme chemical and abrasion resistance, and sets and cures without shrinkage, in about an hour. IM-KOTE offers a family of products with profound cross-linking chemistry, creating, a dense, impermeable surface, highly resistant to corrosive chemicals and extreme physical abuse. .more...