Reagans Canada Inc., Bradford, Ontario

PROBLEM: The steel structure, as well as steel polymer holding tanks of this plastic processing plant were rusting from environmental exposure.

SOLUTION: 510A Aluminized Urethane was applied to stop the rusting process and provide long-term protection of all the exposed steel.


Luzenac Inc. silos, Timmins, Ontario

PROBLEM:The storage silos of this talc manufacturer were corroded due to exposure to industrial contaminants.

SOLUTION: 510A Aluminized Urethane was coated on the silos to arrest the corrosion. After which they were top coated with the 530C Urethane Colour Coat for long-term beauty and protection..


Ontario Housing Apartments, London, Ontario

PROBLEM: Steel balconies were corroding from exposure to elements.

SOLUTION: Primed directly over the rust with the 510A Aluminized Urethane and finish coated with the 530C Urethane Colour Coat for long-term colour and protection with no fading or UV yellowing.


Hamilton Street Railway bus garage and terminal, Hamilton, Ontario

PROBLEM: Heavy traffic in addition to exposure to gas, oils, salt and various chemical compounds were causing premature deterioration of the concrete floor and causing safety and traffic lines to wear away very quickly.

SOLUTION: The entire floor was sealed with the 510S Urethane Sealer and then traffic and safety lines painted in with the 510C Urethane Colour Coat.


Before................. After

Bick’s Pickle, Dunnville

PROBLEM: The acidic environment in this pickle bottling plant caused corroision on the overhead steel structure, creating the potential for product contamination.

SOLUTION: 510A Aluminized Urethane was applied directly over the rusted steel to arrest the corroision and create a safe and clean coated surface.
1.2.3.4.5

The "perfect patch" for concrete repair and overlay. MG-KRETE lasts much longer and withstands wear and heavy traffic better than traditional cement-based patch materials. It tenaciously bonds to the concrete, without shrinkage, creating a surface that is more impervious to moisture, salt, gas and oils. It requires less long-term maintenance. MG-Krete sets within one hour, even at sub-zero temperatures, helping to dramatically cut production downtime. more...

Densifies, hardens and seals concrete permanently from within, becoming an integral part of the matrix, not just a surface coating. Untreated concrete is porous and susceptible to intrusion by salts, gases and oil. Treatment with D-TECH provides a permanent solution with unparalleled resistance to contamination and abrasion, never wearing off. more...

Meets the most demanding needs for extreme chemical and abrasion resistance, and sets and cures without shrinkage, in about an hour. IM-KOTE offers a family of products with profound cross-linking chemistry, creating, a dense, impermeable surface, highly resistant to corrosive chemicals and extreme physical abuse. .more...